User Manual

Live Video
25
3
3.2.2 Starting PAP View
To start the PAP View, follow the instructions below:
1. After you select PAP View, a row of three inset windows appears on the bottom of the
screen.
Figure 3-8
2. Draw a navigation box on the image, and this selected area is immediately reflected in
one inset window. Up to 7 navigation boxes can be drawn on the image.
3. To adjust a navigation box size, move the cursor to any of the box corners, enlarge or
diminish the box.
4. To move a navigation box to another area on the image, drag it to that area.
5. To change the frame color of the navigation box, right-click the image, select Mega Pixel
Setting and click Set Color of Focus Area.
6. To hide the navigation box on the image, right-click the image, select Mega Pixel Setting
and click Display Focus Area of PAP Mode.
7. To delete a navigation box, right-click the desired box, select Focus Area of PAP Mode
and select Delete.
8. To add another navigation box when less than seven navigation boxes are drawn,
right-click the image, select Mega Pixel Setting, and then select Enable
Add-Focus-Area-Mode.
9. To exit the PAP view, click PAP view again.