User Manual

Table Of Contents
Audio Communication
41
4
4.2 Audio Broadcast
The Control Center operator can use the Audio Broadcast function to speak to multiple hosts
at one time.
Note: The Audio Broadcast function supports both GV and third-party IP devices with
speaker functions.
4.2.1 Starting the Audio Broadcast
1. To open the Audio Broadcast window, click the Broadcast Service button on the
Toolbar. This dialog box appears.
Figure 4-3
2. Right-click the host and select Add to Broadcast Service or drag the desired hosts from
the Host List to the Audio Broadcast window.
Tip: To add hosts by dragging, click the Setup button
and select Always on top to
keep the Audio Broadcast window to be on top of other windows.
3. You can mark or unmark the hosts on the Audio Broadcast window to enable or disable
audio broadcasting to them.
4. To start audio broadcasting to the hosts, click the Start/Stop Broadcasting button
on the Audio Broadcast window, and talk to the microphone connected to the computer of
Control Center.