User Manual
Table Of Contents
- GV-Control Center User's Manual V3.1.0.0
- Copyright
- Content
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live Video
- Chapter 4 Audio Communication
- Chapter 5 Playback
- Chapter 6 Remote DVR Applications
- Chapter 7 I/O Central Panel
- 7.1 Running the I/O Central Panel
- 7.2 The I/O Central Panel
- 7.3 Creating a Group for Cascade Triggers
- 7.4 Monitoring Hosts from the I/O CentralPanel
- 7.5 Configuring the I/O Central Panel
- 7.6 Viewing Connection Log
- 7.7 Setting Up Mode Schedule
- 7.8 Quick Link
- 7.9 Forcing Output
- 7.10 Editing Background Image
- 7.11 Managing a Group of I/O Devices
- 7.12 Controlling I/O Devices
- 7.13 Popping Up Live Video upon InputTrigger
- Chapter 8 Multi Monitors Applications
- 8.1 Application Position
- 8.2 Matrix View
- 8.3 Video Wall
- 8.3.1 Setting Up a Video Wall Server
- 8.3.2 The Layout List
- 8.3.3 Adding a Server and Configuring the Layout
- 8.3.4 Activating the Channel and Layout
- 8.3.5 Setting Up a Zoom Window
- 8.3.6 Setting Up a Scan Window
- 8.3.7 Displaying Remote Monitor, Web Page and PlayingBack Videos
- 8.3.8 Displaying Live View from Remote E-Map
- 8.3.9 Remotely Accessing the Video Wall Server
- 8.3.10 Updating the Video Wall Server Version
- 8.4 Fisheye View
- Chapter 9 Other Applications
- Chapter 10 System Configuration
- Appendix
Chapter 5 Playback
5.1 Instant Playback
You can retrieve the recordings from the DVR or GV IP device and play video back.
The following function must be enabled ahead to allow remote access from the Control
Center:
• DVR: Enable recording and Remote ViewLog Service
• GV IP devices: Enable recording and ViewLog Server.
1. To start instant playback:
• In the Host List (Figure 1-3) or Group List (Figure 1-4), right-click one camera and
select Instant Play (5 Min).
• On the Live View window (Figure 3-2), right-click one camera and select Instant Play
(5 Min).
• In the VMD window, right-click the pop-up camera and select Instant Play (5 Min).
• On the I/O Central Panel (Figure 7-2), click an input icon and select Instant Play or
right-click an input icon, select Information, select an event from the Trigger Time
List and select Instant Play.
• In the Matrix view (Figure 8-5), click on the Camera Name, select Instant Play and
select the time length.
• On the Remote E-Map (Figure 9-9), click the Host Information button
to
display the Host Information dialog box and select an event for playback.
Tip: By default, the event selected from Remote E-Map is played back on the Control
Center’s main window. To play back in a separate Instant Playback window, see 8.1
Application Position for details.