User Manual

48
If the client wants to interrupt the connection, click the button at the bottom right corner.
A valid ID and Password are required to stop the connection.
Tip: If you wish to minimize the bandwidth used while viewing cameras of the client DVR,
you can choose to view certain cameras only. There are two ways to activate and deactivate
cameras:
1. Before connecting to the client DVR, in the Control Center, click the Application
Position button
, right-click the Remote DVR window, and select Activate Remote
Channels to select or unselect cameras.
Figure 6-2
2. When connecting to the client DVR, on the main screen of the client DVR, click the Exit
button, and then select Activate Remote Camera. Check or uncheck cameras.
Note: Remote DVR current does not support audio ouput, PTZ and I/O control.