User Manual

Table Of Contents
68
7.12 Controlling I/O Devices
The Control Center operator can manually arm or disarm any I/O devices of different hosts
without interrupting the monitoring.
Note: This function also supports the client GV IP devices of these firmware versions:
GV-Compact DVR: Firmware V1.43 or later
GV-IP Camera: Firmware V1.05 or later
GV-Video Server: Firmware V1.45 or later
Arming or disarming I/O devices
1. On the Standard I/O List, right-click one host and select I/O Enable Setting. This dialog
box appears.
Figure 7-19
2. Check the Input/Output to arm or uncheck the Input/Output to disarm the device (s).
Then click Apply to verify the changes.