Quick Start Guide

1.6 Enabling Live View
Live views are popped up on the Center V2 when events and motion are
detected at the subscriber. You can also enable live views to be shown
constantly on the Center V2.
1. GV-System / GV-VMS needs to grant Center V2 the privilege to allow
live viewing.
A. Follow steps 1 and 2 in 1.5 Connecting to Center V2 to access
the Connect to Center V2 dialog box (Figure 1-7).
B. Click Configure, select Advanced Settings and click the
Camera tab. The Advanced Settings dialog box appears.
2. Select Allow Center V2 to View Live Camera.
Figure 1-8
14