User Manual

1.17.2 Configuring a Virtual GV-I/O Box
1. On the Center V2 window, click the Preference Setting button (No. 8,
Figure 1-2) and select Virtual I/O. The Virtual I/O Device dialog box
appears.
2. Click the Add button. This dialog box appears.
Figure 1-64
3. Select the device using the drop-down list, and type the IP address,
ID and Password of the GV-I/O Box. You can look up the IP address
of the GV-I/O Box using the GV IP Device Utility.
4. Click OK to finish adding the GV-I/O Box.
5. To trigger outputs automatically by event, see Triggering Outputs by
Events later in this section.
6. To trigger outputs manually, see Triggering Outputs Manually later in
this section.
92