User Manual

1.20 E-Map Alerts
You can configure an instant E-Map alert to lay out the locations of
triggered cameras, sensors and alarms within a floor plan.
For this application, subscribers must already create their own E-Maps
using the E-Map Editor and activate WebCam Server.
To access the E-Map at the Center V2, right-click one online subscriber on
the Subscriber List (No. 4, Figure 1-2) and select E-Map. The Remote
E-Map window will appear. When motion or input trigger is detected on the
subscriber, the camera or input icon on the E-Map will blink for alert. You
can also double-click the camera icon to see its live view.
1.20.1 The Remote E-Map Window
1 2 3 5 6 74
8 9 10 11 12
Figure 1-74
106