User Manual

2.6 Connecting Center V2 to Dispatch
Server
Follow these steps to connect Center V2 to Dispatch Server:
1. Start the Dispatch Server service.
2. At Center V2, click the Preference Settings button (No. 8, Figure 1-1),
select System Configure to display the Preference window, and then
click the Dispatch Server tab. The Preference dialog box appears.
3. Click the Dispatch Server tab. Type the identification code, IP
address, and the port of the Dispatch Server.
Figure 2-7
4. Click OK.
5. Restart the Center V2. Without this step, the Center V2 will not
connect to the Dispatch Server.
130