User Manual

Dispatch Server
2
2.7 Connecting to Dispatch Server
Follow the steps below to configure and connect GV-System / GV-VMS to
Dispatch Server:
1. Access the Center V2 login dialog box (Figure 1-9) on GV-System /
GV-VMS.
 On GV-System’s main screen: Click the Network button
, and
then select Connect to Center V2.
 On GV-VMS’s main screen: Click Home, Toolbar, Network, and
then select Connect to Center V2.
2. In the Center IP field, type the IP address of the Dispatch Server.
3. Type a user ID and password created in the Dispatch Server.
4. Change the port number from 5547 (Center V2 port) to 21112
(Dispatch Server port).
5. Click the OK button. The Connect to Center V2 dialog box appears.
6. Click the Connect button to enable connecting to the Dispatch Server.
Note: If you want to modify the login information of the Center V2, on the
Connect to CenterV2 dialog box, click the listed Center V2 IP and then
select Modify.
131