User Manual

[Network Setting]
 Server Port: The port should match with the Dispatch Server Port of
Center V2 (Figure 2-8). Or, keep the port setting as default.
To automatically configure these ports on your router by UPnP
technology, click the Arrow button. For details on UPnP settings, see
UPnP Settings, Appendix.
 Allow GV IP devices to login as subscriber from port: Enables the
connection to the GV-Video Server, GV-IP Camera, and GV-Compact
DVR. The default port is 5551, or modify it to match the Center V2 port
on the GV IP devices. For details, see GV-Video Server User’s Manual,
GV-IP Camera User’s Manual or GV-Compact DVR User’s Manual.
 Auto run server service upon startup: Automatically starts the
Dispatch service when its program starts.
 Automatic Failover Support: Distributes Center V2 Servers to
another Dispatch Server when the serving Dispatch Server breaks
down. Enabling this item, you will be prompted to enter the IP address
and port of another Dispatch Server. For details, see 2.17 Failover
Server.
 Allow unidentified CenterV2 Server login: Allows Center V2 to
access Dispatch Server without entering the Identification Code.
 Identification Code: The code protects Dispatch Server against
unauthorized Internet access. Center V2 will need the code to log in
Dispatch Server.
[Dispatch Setting]
 Group First: Keeps subscribers in the assigned groups and Center V2
Servers.
 Balance Only: Distributes subscribers to Center V2 Servers with
fewer subscribers.
Note: An unassigned subscriber will be automatically dispatched to a
Center V2 Server by balance loading.
144