User Manual

The types and messages displayed on Center V2:
Type Message
Motion Camera xx detected motion.
Trigger Module xx triggered.
Connection
Camera xx video lost; Module xx I/O lost; Network abnormal;
Fail to login to dispatch server; Dispatch server is shutdown;
Video signal of xx has resumed; Module xx has returned to
normal; Failed to login SMS server; Failed to send short
message; SMS server is shutdown.
Alarm
Disk Full; Restarted Failed; Multicam Closed; There isn’t
enough space for recording; Multicam Surveillance System
has been closed; An unexpected error occurred in Multicam
Surveillance System. (Error Code: 1 or 2); There is an
intruder; Object Missing; Unattended Object; Alert Message
of POS; Scene Change.
System
Start/end service; IP change; Record failed; Status change of
monitoring camera. On: xx Off: xx / (By Schedule); Stop/start
all cameras monitoring; Start/stop I/O Monitoring. / (By
Schedule); Schedule start; Schedule stop. All monitoring
devise are stop too. Start monitoring all type events; Stop
monitoring all type events; Subscriber session is not
established. Wait-time expired; Unexpected logout before
subscriber session is completed; Can’t find USB Protection
Key.
Attachment Record file of Camera xx.
Wiegand Data Card No. xxxxxx (Camera xx)
Note: Error Code 1 indicates a codec error; Error Code 2 indicates that
users can’t write or record any data due to HD failure or user privilege.
10