User Manual
Table Of Contents
- GV-CMS Series User's Manual V14.10
- Copyright
- Contents
- Preface
- Naming and Definition
- Chapter 1 Center V2
- 1.1 Minimum System Requirements
- 1.2 Installation
- 1.3 The Center V2 Window
- 1.4 Subscriber Account
- 1.5 Connecting to Center V2
- 1.6 Live View
- 1.7 Recording
- 1.8 Playback
- 1.9 Two-Way Audio
- 1.10 Advanced Monitoring and Management
- 1.11 Subscriber Schedule
- 1.12 Alarm Report
- 1.13 Event List
- 1.14 Event Log Browser
- 1.15 System Configuration
- 1.16 Notification Settings
- 1.17 Output Alerts
- 1.18 SMS Alerts
- 1.19 E-Mail Alerts
- 1.20 E-Map Alerts
- 1.21 Event Chart
- 1.22 Failover Server
- 1.23 Assigning a Subscriber to Another Center V2
- 1.24 Channel Display on Another Monitor
- Chapter 2 Dispatch Server
- 2.1 Minimum System Requirements
- 2.2 Installation
- 2.3 The Dispatch Sever Window
- 2.4 Subscriber Account
- 2.5 Service Startup
- 2.6 Connecting Center V2 to Dispatch Server
- 2.7 Connecting to Dispatch Server
- 2.8 Connecting GV-IP Device to Dispatch Server
- 2.9 Setting a Primary Center V2 Server
- 2.10 Event Query
- 2.11 Event List
- 2.12 Subscription Schedule
- 2.13 Live View
- 2.14 Log Browser
- 2.15 System Configuration
- 2.16 SMS Alerts
- 2.17 E-Mail Alerts
- 2.18 Event Chart
- 2.19 Failover Server
- Chapter 3 Vital Sign Monitor
- 3.1 Minimum System Requirements
- 3.2 Installation
- 3.3 The Vital Sign Monitor Window
- 3.4 Subscriber Account
- 3.5 Service Startup
- 3.6 Connection to Vital Sign Monitor
- 3.7 Subscriber Monitoring
- 3.8 Subscriber Schedule
- 3.9 Alarm Report
- 3.10 Remote Playback
- 3.11 Event List
- 3.12 Event Log Browser
- 3.13 System Configuration
- 3.14 Output Alerts
- 3.15 SMS Alerts
- 3.16 E-Mail Alerts
- 3.17 Temperature Alarm
- 3.18 Event Chart
- 3.19 Failover Server
- Appendix
- A. Dongle Description
- B. Upgrading the Black Dongle
- C. Fast Backup and Restoration
- D. Watermark Proof
- E. PTZ Control Using GV-Joystick V2
- F. Image Size on Center V2
- G. UPnP Settings
- H. Supported IP Device Brands and Protocols
- I. MultiLang Tool for Translated Text
- J. Specifications
- K. Installing Net. Framework 3.5 for Windows Server 2012 and Windows 8
Center V2 1
Figure 1-14
[I/O Device]
Notifies the Center V2 of when I/O devices are triggered. Use the Arrow
buttons to configure each I/O device, or click the Finger button to apply to
all I/O devices.
Allow Center V2 to Enable / Disable I/O: Allows Center V2 manually
arm/disarm any I/O devices at the subscriber’s site without
interrupting the monitoring.
For example, when an alarm is triggered at the subscriber site, the
Center V2 operator can turn it off remotely before the security staff
arrives at the site. Meanwhile, GV-System / GV-VMS still remains on
monitoring.
Send to Center V2 when I/O is Triggered: Notifies Center V2 when
29