User Manual
Table Of Contents
- GV-CMS Series User's Manual V14.10
- Copyright
- Contents
- Preface
- Naming and Definition
- Chapter 1 Center V2
- 1.1 Minimum System Requirements
- 1.2 Installation
- 1.3 The Center V2 Window
- 1.4 Subscriber Account
- 1.5 Connecting to Center V2
- 1.6 Live View
- 1.7 Recording
- 1.8 Playback
- 1.9 Two-Way Audio
- 1.10 Advanced Monitoring and Management
- 1.11 Subscriber Schedule
- 1.12 Alarm Report
- 1.13 Event List
- 1.14 Event Log Browser
- 1.15 System Configuration
- 1.16 Notification Settings
- 1.17 Output Alerts
- 1.18 SMS Alerts
- 1.19 E-Mail Alerts
- 1.20 E-Map Alerts
- 1.21 Event Chart
- 1.22 Failover Server
- 1.23 Assigning a Subscriber to Another Center V2
- 1.24 Channel Display on Another Monitor
- Chapter 2 Dispatch Server
- 2.1 Minimum System Requirements
- 2.2 Installation
- 2.3 The Dispatch Sever Window
- 2.4 Subscriber Account
- 2.5 Service Startup
- 2.6 Connecting Center V2 to Dispatch Server
- 2.7 Connecting to Dispatch Server
- 2.8 Connecting GV-IP Device to Dispatch Server
- 2.9 Setting a Primary Center V2 Server
- 2.10 Event Query
- 2.11 Event List
- 2.12 Subscription Schedule
- 2.13 Live View
- 2.14 Log Browser
- 2.15 System Configuration
- 2.16 SMS Alerts
- 2.17 E-Mail Alerts
- 2.18 Event Chart
- 2.19 Failover Server
- Chapter 3 Vital Sign Monitor
- 3.1 Minimum System Requirements
- 3.2 Installation
- 3.3 The Vital Sign Monitor Window
- 3.4 Subscriber Account
- 3.5 Service Startup
- 3.6 Connection to Vital Sign Monitor
- 3.7 Subscriber Monitoring
- 3.8 Subscriber Schedule
- 3.9 Alarm Report
- 3.10 Remote Playback
- 3.11 Event List
- 3.12 Event Log Browser
- 3.13 System Configuration
- 3.14 Output Alerts
- 3.15 SMS Alerts
- 3.16 E-Mail Alerts
- 3.17 Temperature Alarm
- 3.18 Event Chart
- 3.19 Failover Server
- Appendix
- A. Dongle Description
- B. Upgrading the Black Dongle
- C. Fast Backup and Restoration
- D. Watermark Proof
- E. PTZ Control Using GV-Joystick V2
- F. Image Size on Center V2
- G. UPnP Settings
- H. Supported IP Device Brands and Protocols
- I. MultiLang Tool for Translated Text
- J. Specifications
- K. Installing Net. Framework 3.5 for Windows Server 2012 and Windows 8
Live drop-down list: Highlight one camera, and select Play (enable
live display) or Stop (disable live video).
Suspended Motion Monitoring: Highlight one camera, and set the
interval between incoming events triggered by motion detection.
Alternatively, you can right-click one live camera channel on the
monitoring window and select Suspend for the same setting.
Suspend Video Lost Monitoring: Highlight one camera, and set the
interval between incoming events triggered by video lost.
Status column: Displays the status of video lost from cameras or
disconnection.
3. Click OK to apply the settings.
If the camera is enabled for live display, you will see in the upper right
corner of its monitoring window; otherwise, you will see .
54