User Manual

14
2. In the User Name and Password fields, type default value admin and 1234
respectively, and then click OK. This page appears.
Figure 10
Note: User Name is fixed, but Password is changeable. See 4.3.3 Changing Password.
3. In the GV-Data Capture V3E Name field, name the connected V3E.
4. Click Disable. Type the static IP address information, including IP Address, Subnet
Mask, Default Gateway and Domain Name Server.
5. Click Submit. When the connection is established, the Status field indicates: Register
Success.
Note: If you like to use the domain name instead of IP address, you may use Domain
Name Service as well. For details on domain name service, refer to 4.1.2 DHCP.