User Manual
Table Of Contents
22
4.2 Configuring GV-System
After configuring the GV-Data Capture V3E, you need to set the GV-System to match your
POS system’s network as well.
4.2.1 Fixed IP
To set the GV-System for a static IP address network:
1. Click the Configure button on the main screen, point to POS Application Setting,
and then select POS Device Setup. The POS Server Setup dialog box appears.
2. Click the New tab. This dialog box appears.
Figure 18
Printer Type: Select TCP/IP Port from the drop-down list.
Device: Use the drop-down list to select a number to specify how many POS
device are connected, and rename the POS device in the next column if necessary.
Mapping Camera: Specify a channel to display POS data of the selected device.