User Manual

V3E Settings
23
4
 POS Module: Select the printer connected to the POS system. If it’s not Epson,
select General for other brands.
 Cash Drawer Open Signal: This option is only available when an input module is
configured in the GV-System. Assign the input module connected to the cash
drawer. Every time when the cash drawer is open, it will be recorded in System Log
for later retrieval.
 Use Codepage Mapping: This option is to support special character and symbol
display. For details, see “Codepage Mapping”, Chapter 3, GV-DVR User’s Manual
on the Surveillance System Software CD.
 Trace Mode: Check this option only after getting the recommendation from our
technical support staff.
3. Click the Data Capture IP Address Setting tab. This dialog box appears.
Figure 19
4. Select Fixed IP, and type the IP address of the POS system.
5. In the Device Port field, keep default value 4000. Or modify it to match that of the POS
system (see Figure 22).
6. In the Password field, type default value 1234.
7. If you need to change or view the configurations of V3E, click the Browse Device
Setting button. The GV-Data Capture V3E Web interface (see Figure 10) will appear.
8. Click OK to add the POS system to GV-System.