User Manual

Configuring Main System
1
1.11 PTZ Control
With the PTZ control panel, you can control PTZ functions, e.g. pan, tilt, zoom, focus and preset points.
This control panel will not appear, unless at least one PTZ camera is connected to the system.
Adding a PTZ Camera
For the IP Camera, skip steps 1 to 3 and start from the step 4.
1. Click Configure button (No. 14, Figure 1-2), select Accessories, select PTZ Device and select
Add / Remove PTZ. This dialog box appears.
Figure 1-73
2. Select the brand of your camera, and click the
button.
3. Click OK and restart the GV-System.
4. Click Configure button (No. 14, Figure 1-2), select Accessories, select PTZ Device and select
PTZ Device Setup. This dialog box appears.
Figure 1-74
5. For an IP camera, select the brand name from the drop-down list and click OK.
6. For an analog camera:
89