User Manual

122
4. The options in the dialog box may vary depending on camera brands.
 Dual Stream: Use the default codec and resolution of the GV-IP camera. To see the default
resolutions after the camera is added, refer to Appendix I.
 Query: Use the current codec and resolution setting on the GV-IP camera.
 Camera list: Select a camera number.
 Port: Video streaming port number.
 Stream Type: You may have the option of single or dual streaming depending on camera
models.
 Codec Type: You may have different codec options depending on camera models. If the
selected camera supports dual streaming, the preview codec and recording codec can be set
differently.
 Resolution: You may select the different resolutions for preview and recording.
5. Click Apply. The IP camera is added to the list.
6. Right-click the camera and select Display position to map the IP camera to a channel on the
GV-System.
Figure 2-4
7. The Status column now should displa d”. Click OK.
o customize camera settings such as codec and frame rate, right-click the camera to see the list of
ips: You can access the configuration interface of the connected IP device by right-clicking the IP
y “Connecte
T
options. See Customizing IP Camera Settings section below for more details.
T
device and selecting Remote Camera Setting.