User Manual

Table Of Contents
130
2.8 ONVIF & PSIA Connection
The GV-System is compatible with all other IP video devices using ONVIF and PSIA standards. The
ONVIF (Open Network Video Interface Forum) specification and PSIA (Physical Security
Interoperability Alliance) specification are global standards created to ensure network video products
from different manufacturers are compatible with each other.
2.8.1 ONVIF Connection
GV-System supports dual streaming of IP cameras connected through ONVIF protocol. For each
stream, you can set codec, resolution, maximum bit rate, maximum frame rate, image quality and GOV
values.
To add and set up an IP camera through ONVIF protocol:
1. Click the Configure button (No.14, Figure 1-2), select System Configure, select Camera Install,
and select IP Camera Install.
2. Click Add Camera. This dialog box appears.
Figure 2-10
3. Type the IP address, User name, and Password of the camera.
4. For Brand, select Protocol; for Device, select ONVIF. A dialog box appears after the system
confirms that the camera is ONVIF compatible.