User Manual

132
2.8.2 PSIA Connection
To connect to an IP device through PSIA protocol, follow the steps below.
1. Click the Configure button (No.14, Figure 1-2), select System Configure, select Camera Install,
and select IP Camera Install.
2. Click Add Camera, and type the camera’s Server IP, Username, and Password.
3. From the Brand drop-down list, select Protocol.
4. For Brand, select Protocol; for Device, select PSIA. A dialog box appears.
Figure 2-12
5. A dialog box appears after the system confirms that the camera is PSIA compatible. Click Query.
6. After the camera is located, click Apply.