User Manual

Video Analysis
3
[Enable Mask] Click to display the mask on the defined detection region when you te
1. Click
st the settings.
to display the following dialog box, select the PTZ brand and the hardware address,
and click OK to apply the settings.
Figure 3-3
2. Choose the corresponding camera views of the PTZ and stationary cameras. In Figure 3
images of the PTZ camera show in the Camera 2 view, w
-2, the
hile the images of the stationary camera
ra with the sliders of Pan, Tilt and Zoom. Make sure the PTZ
camera view is as simila s possible to the stationary camera view.
4. Click the Save button
show in the Camera 1 view.
3. Adjust the view of the PTZ came
r a
to save the both views as image references.
5. Adjust Sensitivity or keep it as default.
145