User Manual

Table Of Contents
Video Analysis
3
3.1.2 Object Zooming
ply apply it for the
n. The feature allows you to configure up to 4 critical views for instant
monitoring and zooming.
Before configuring the Object Zooming function, first configure the PTZ device. Refer to Setting up a
PTZ Camera in Object Tracking earlier in this chapter.
1. Click the Configure button (No. 14, Figure 1-2), point to Video Analysis, select Object Tracking
Application Object Tracking Setup ject Tracking Config dialog box.
Then click the Zoom in Object tab in the upper part to display the following dialog box.
Note: The image on the right will not display until you complete the settings below.
If only one PTZ camera is available, without the stationary camera, you can sim
object zooming functio
Setting up a PTZ Camera
Setting up Object Zooming
After the above PTZ setup, go back to the menu bar.
, and select to display the Ob
Figure 3-9
149