User Manual

154
nd the camera will
ving object. Select Deep Zooming and the camera will zoom in three
6. Select Support Zoom Function to be able to zoom in and out. Select Normal a
zoom in once on the mo
times on the moving object.
7. Click the
button to adjust the direction and zoom level of the camera.
8. To set the camera to return to its home position or a preset position when no motion is detect
a certain tim
ed for
e period, specify Idle Mode and Idle Time in seconds. Click on the
button to
home position and
t Active
10. To outline a mask area where motion will be ignored, draw an area on the camera view and click
n the mask,
ct through the view of camera and its movement should be tracked. If not,
ew. If you have
lay masked area during the test.
12. Click OK to apply the settings.
sis, select Object
ing Application, and select Object Tracking Start.
Note: When multiple objects are moving at the same time, the camera will track the object with the
largest area.
preview the designated position. Note that your camera will need to support
preset position.
9. To activate the function at certain times only, click the Schedule button and selec
Schedule. For details, see Video Analysis Schedule later in this chapter.
Set Mask on the dialog box that pops up. To remove the mask, draw an area bigger tha
and click Remove Mask.
11. Click Test. Move an obje
increase Sensitivity value to increase system sensitivity to motion in the camera vi
set a mask, you can select Enable Mask to disp
13. To begin single camera tracking, click the Configure button, select Video Analy
Track