User Manual

162
tion zones.
Without an AVP Dongle
Set up the counter by drawing boxes to mark the detec
Figure 3-20
1. In the Choose Camera section, select a camera from the drop-down list for setup.
2. Sel w.
a. On the live view, draw at least two boxes to mark the in and out detection zones. Each
detection zone is numbered. You can use
ect Enable Setting and set up the counter using the options belo
 Define Detection Zones: Select this option to define the counter.
and to reverse or delete the
detection . To switch to another detection zone, click the
zone button.
b. Click the
button to define the in and out criteria. This dialog box appears.
Figure 3-21