User Manual

Video Analysis
3
c. In the Set Direction section, select In and define the direction using the drop-down
nd Direction table.
sing the drop-down
Add button.
f. Click OK. The directions are indicated by arrows on the live view.
n the illustrated
it moves along the direction of the
red arrow through detection zone 0 and 1, and the object is counted as out when it moves
along the direction of the green arrow through detection zone 1 and 0.
 Define Object Size: Select this option and click the
lists in the Select Detection Zone section.
d. Click the Add button. This setting appears under Detection Zones a
e. Select Out in the Set Direction section, define the direction u
lists in the Select Detection Zone section, and click the
You have now set up the object counter with the in and out criteria defined. I
example (Figure 3-20), a target object is counted as in when
button to pause live images.
argeted object.
le above.
Note: Draw the detection zones as closely as possible to avoid omission of counting when target
obje ne of the two boundaries.
Use the mouse to outline a region matching the normal size of the t
3. To complete the counting setting, follow Steps 3 to 6 in With an AVP Dong
cts show up from the unmarked area and move only through o
163