User Manual

164
3.4.2 Intrusion Alarm
e the defined region, the alarm can be activated for warning. To set
the intrusion alarm, click the Alarm tab.
With an AVP Dongle
ary of detection zones.
When any object crosses or is insid
Set up the intrusion alarm by using lines to mark the bound
Figure 3-22
1. In the Choose Camera section, select a camera from the drop-down list for setup.
2. Select Enable Setting and define the targeted objects using the options below.
 Define Detection Zones: See Step 2 in With an AVP Dongle in Object Counting earlier in this
chapter.
 Define Object Size: See Step 2 in With an AVP Dongle in Object Counting earlier in this
chapter.