User Manual

Video Analysis
3
Without an AVP Dongle
Set up the intrusion alarm by drawing boxes to mark the detection zones.
Figure 3-24
1. In th setup.
2. Sele g ns below.
.
a. On the live view, draw at least two boxes to mark the i and out detection zones. Each
detection zone is numbered. You can use
e Choose Camera section, select a camera from the drop-down list for
ct Enable Setting and define the targeted objects usin the optio
 Define Detection Zones: Select this option to set up the counter
n
and to reverse or delete the
detection . To switch to another detection zone, click the
zone button.
b. Click the
button to define the alarm criteria. This dialog box appears.
Figure 3-25
167