User Manual

Table Of Contents
168
for
one section to
ction.
n table.
e. Click OK. The directions are indicated by arrows on the live view.
trated example
ct moves along the direction of the red arrow through detection zone 0
and 1, the alarm will be activated.
Note: Draw the detection zones as closely as possible to avoid omission of intrusion events when
target objects show up from the unmarked area and only move through one of the two boundaries.
c. In the Set Direction section, select 1 Direction for uni-direction or 2 Direction
dual-direction criteria, and use the drop-down lists in Select Detection Z
define the dire
d c. Click the Add button. This setting appears in the Dete tion Zones and Directio
You have now set up the counter with the intrusion alarm criteria defined. In the illus
(Figure 3-24), when an obje
In this case, the alarm will not set off.
Define Object Size: See Step 2 in Without an AVP Dongle in Object Counting earlier in this
chapter.
3. To complete the intrusion alarm setting, follow Steps 3 to 8 in With an AVP Dongle in Intrusion
Alarm earlier in this chapter.