User Manual

182
faces are detected under Mask Filter or
rm). Assign an
: Prevents recorded events from being recycled when the recycle threshold
5. Click reference. If
s you specified.
6. elect Active
7. ly the settings.
Not
nts triggered under Mask Filter or Mask Filter (Inverse alarm) will be recorded to the
em Log, and can be played back in ViewLog. In the System Log, the events are recorded as
2. The face counting results will only be saved when b Report is selected and the
 Output Module: Activates the output device when
when the system is unable to detect faces under Mask Filter (Inverse Ala
output module and pin number for the device.
 Never Recycle
is reached.
the Test button to see if the settings have been configured according to your p
you have set a detection interval, the test will only run for the number of second
To activate the function at certain times only, click the Schedule button and s
Schedule. For details, see Video Analysis Schedule later in this chapter.
Click OK to app
8. Start monitoring to run the application.
e:
1. Eve
Syst
Face Count under the Event column.
Enable We
GV-Web Report is connected.
3. The counter function is not suggested to be applied in fisheye cameras.