User Manual

194
3 2 Stitchin with Overlapping Areas
To stitch images from different cameras together, follow these steps:
1. e panoram p-down list. If you want to rename the
d panorama ld.
2. e camera en click Manual
.1 .1 g a Panorama View
Select on a set (No. 13, Figure 3-48) from the dro
selecte set, type the name in the fie
Select on from the Source drop-down list (No. 14, Figure 3-48) and th
Setting (No.3, Figure 3-48). This dialog box appears.
Figure 3-49
3. From the Reference drop-down list, select one camera as the Reference image. At this step, the
camera you selected at Step 2 will be the only Reference image.
4. From the Source drop-down list, select one camera as the Source image to be stitched with the
selected Reference image.
5. To stitch the two images together, click on a significant point in the Reference image and then look
for the same point in the Source image. A dialog box of point selection will prompt you to confirm.
s for stitching. You need to set up 3 point
Figure 3-50