User Manual

210
3.1 ne Change Detection
ly be applied in the indoors, the advanced version
ne Change Detection
detects and prevents any changes of scene, viewing angle or focus clearness made by malice.
cene Change
8 Advanced Sce
Compared to Scene Change Detection that can on
of Scene Change Detection can be applied in the outdoors. The Advanced Sce
Note:
1. Up to 16 cameras can be configured for this application.
2. It is highly recommended not to use Advanced Scene Change Detection and S
Detection together.
and select
Change Detection Setting.
2. igure. This dialog box appears.
1. Click the Configure button (No. 14, Figure 1-2), click Advanced Video Analysis,
Advanced Scene
Select the desired camera(s) to be configured, and click Conf
Figure 3-62
3. Select a camera from the Camera Selection drop-down list, and configure these settings:
 Mask Region: If necessary, mask off the area on the camera view where motion will be
ignored.
 Sensitivity: Adjusts detection sensitivity. The higher the value, the more sensitive the system
is for changes in the camera view.