User Manual

Table Of Contents
Configuring Main System
1
1.2 System Configuration
This section introduces system configurations of the GV-System.
1.2.1 General Setting
Let’s start with the options on the General Setting dialog box. Changes made on the General Setting
dialog box would apply to all available cameras attached to the system. Click the Configure button
(No.14, Figure 1-2), select System Configure, and click General Setting to access the following
dialog box.
Figure 1-4
[Location Name] The given name (maximum 14 characters) is displayed in main screen as the name
of the server.
[Caption] Display camera ID and name on the upper left-hand corner of the camera screen. You may
choose No for no caption; ID to show only camera ID; ID+Name to show both camera ID + Name.
[Monitor Option] Select Start Delay to start recording after x second(s) when the system is activated.
[Camera Scan] When rotating through screen divisions, GV-System will switch to the next screen
division after the time specified in the drop-down list elapses.
11