User Manual

I /O Applications
349
6
6.8.1 Setting a Module
Up to 16 connected I/O devices can be combined to be one module for the GV-System to use. Note
that I/O devices from GV-Video Server, GV-Compact DVR and GV-IP Camera can be combined to
build a module. However, I/O devices of GV-Wiegand Capture or GV-I/O Box can only combine with
those of another GV-Wiegand Capture or GV-I/O Box to set up a module.
1. Ensure the GV-IP Device, GV-Wiegand Capture or GV-I/O Box of Ethernet module has added to
and recognized by the GV-System.
2. In the Virtual I/O Device Setting dialog box (Figure 6-37), select one device, e.g. GV IP Device,
and click the Add button. This dialog box appears.
Figure 6-38
3. The connected devices appear on the IP address list. Select the desired devices and click the [>>]
button to add their I/O devices to the Mapping list. The total number of added I/O devices is
displayed at the bottom of the Mapping list. Click OK.
4. Select the added module from the list, and define the input status in the Monitor Input section. For
details, see [Input x] in I/O Device Setup earlier in this chapter. Click OK.
5. On the main screen, click the I/O button (No. 7, Figure 1-2). This module is available from the
selection list.