User Manual

Table Of Contents
360
7.2.2 Network Connection
1. Connect the GV-System and POS device to the network as illustrated below.
GV-System + USB dongle
POS Device
LAN or
INTERNET
Figure 7-10
2. Insert the Software DVD to the POS device. It runs automatically, and a window appears.
3. Click Install GeoVision Primary Applications.
4. Select GV-POS Data Sender [Only for Graphic Mode POS System], and follow on-screen
instructions to complete the installation.
5. Select POS Data Sender from Windows Start Menu. The POS Data Sender dialog box appears.
6. Select TCP/IP.
7. Type Password or modify Port value to match those on the GV-System if necessary. By default,
the port value is 4000, and the password fields in both POS Data Sender and GV-System are left
blank. The first-time user can skip the step and follow the next step to test the connection.
Settings on POS Data Sender Settings on GV-System
Figure 7-11
8. Click Start Service to send graphic data to GV-System.