User Manual

Table Of Contents
386
8.2.2 Server Settings
Figure 8-6
server.
transfer data
] Enable the Secure Sockets Layer (SSL) protocol to ensure the security and privacy of
vate Key or ones verified by SSL
authority, click the […] buttons and select the files stored at your computer. Note that the system will
g SSL 3.0, select
[Detect UPnP] For details, see UPnP Settings later in this chapter.
Note: If you want to enable SSL 3.0 on a computer running Windows Vista, it is required to upgrade
your system to Service Pack 1 or Service Pack 2.
[Run GeoHTTP Server] Enable Geo-developed HTTP server or use your own HTTP
Command Port is the port used to access WebCam, and Data Port is the port used to
over Internet.
[Enable SSL
Internet connection. To use your own generated Certificate and Pri
enable both SSL 2.0 and SSL 3.0 as its default; to disable SSL 2.0 protocol when usin
Disable SSL2.0.