User Manual

Table Of Contents
Remote Viewing
8
8.2.3 Video Settings
umber of channels allowed to access the WebCam server, with
efault resolution on
De-interlace),
(De-interlace)) or Large (640 x 480 or 704 x 480) size on the remote site, you also
e Configure
nd then select Video
ons, and then click
¾ For IP video source, you may have larger size than DVR’s. Besides normal, middle and large
pressed and
er.
control selected PTZ cameras at a remote
computer. Click the button and select the desired PTZ cameras to work on the WebCam server.
Note: To specify the time length allowed for a guest user to access the WebCam server, click the
Configure button on the main screen, select System Configure, select Password Setup, and select
Local Account Edit. On the WebCam tab, select the Limit Connection Time option and specify the
time length. The time range is between 10 and 3600 seconds.
Figure 8-7
Max. Channel(s): Specify the n
the upper limit of 200 channels.
Max Image size: Select a maximum resolution on the WebCam server. The d
the WebCam is Normal (320 x 240).
¾ For DVR video source, if you want to view the image of Middle (640 x 480 (
704 x 480
have to configure a corresponding Video Source at the GV-System. Click th
button on the main screen (No. 14, Figure 1-2), point to A/V Setting, a
Source. In the Video Resolution field, select 640 x 480 or higher resoluti
OK to apply.
size, you can select Actual Size of that IP video. Refer to Hardware-Com
Megapixel Stream in Single View Viewer and Multi View Viewer later in this chapt
Allowed PTZ camera: The option allows you to
387