User Manual

Table Of Contents
406
8.3.5 Video and Audio Configuration
camera, click the Show System Menu
. 5, Figure 8-19), and select Video and Audio Configuration.
solution options
onnected GV-System. For details, see Video
Settings in WebCam Server Settings earlier in this chapter. Note the Defog and Stabilizer options are
d GV-System.
To change the video and audio configurations of the connected
button (No
[Camera]
In this tab, you can change the video codec, quality and frame rate immediately. The re
are corresponded to the maximum image size set on the c
only available after they are activated at the connecte
Figure 8-24
[Audio Configure]
In this tab, you can enable the microphone and speaker for two-way audio communication.
Select Speaker to access live audio from the server site, and select Microphone to speak to the
server site. Ensure the speaker and microphone are properly installed in the local computer, and the
audio settings (Figure 8-8) are activated on the WebCam server too.