User Manual

Remote Viewing
8
8.3.9 I/O Control
m event.
s to the remote GV-System.
Click the l.
The new interface provides real-time graphic displays of camera and I/O status, and alar
Additionally, you can force output, as well as enable and disable I/O device
I/O Control button (No. 8, Figure 8-20) to bring out the I/O control pane
cates time, and
ill clear the alarm list.
k the Output
given 60 seconds
supervisor has 999 seconds. Clicking the Stop button will stop the operation
and turn over the control privilege to the next user waiting online.
If you want to enable or disable I/O devices to the remote GV-System, click the Enable/Disable I/O
button. For this, the remote GV-System must grant the privilege first. Enable the Enable Remote
Control option in Figure 8-5.
Figure 8-27 I/O Control
The alarm status is displayed in three levels. The first level indicates date, second indi
the third indicates alarm ID. Clicking the Reset button w
To initiate an output device, click the Enable button, highlight an output and then clic
button. The Timer functions the same as in the PTZ control panel. Each user will be
of control time while the
411