User Manual

Useful Utilities
11
11.5.6 Starting the Server
To configure the server and start the service, follow these steps:
This dialog box appears. 1. Click the Server Setup button (No. 4, Figure 11-16).
which will be used for
the client GV-System to log into the Authentication Server.
3. Click OK to apply the settings.
ces.
You can optionally configure the following settings before starting the Authentication Server:
[Network Setting]
 Server Port: The default port number is 3663. To use UPnP for automatic port configuration to
your router, click the Arrow button. For details, see UPnP Settings in Chapter 8.
Figure 11-22 Sever Setup
2. Under Security Setting, type the Authorized ID and Authorized Password
4. Click the Start/Stop Service button (No. 5, Figure 11-16) to start the servi
525