User Manual

Table Of Contents
Useful Utilities
11
11.10.6 Block List Setup
ting and denying a
ed range of IP address to establish the connection. Note that only one type of block list can be
ist Setup. A dialog box prompts
for you to select a host.
2. click OK. This dialog box appears.
Two types of block lists are provided to restrict access to a WebCam server: permit
specifi
used at one time.
1. Click Configure on the menu bar, and select IP White / Black L
Select the desired WebCam server, and
Figure 11-60
3. Select the type of block list you want to use, and click Add to define the IP addresses.
the connection.
Enable IP Black list: Prohibits the defined range of IP addresses from establishing the
4. Click OK to apply the settings.
Enable IP White list: Allows the defined range of IP addresses to establish
connection.
569