User Manual

Useful Utilities
611
11
ected GV-IP Device, click the check box in the POE
ake effect.
ust close this dialog box
and click the Search button to update the port connection status.
5. To enable the POE function for the conn
column.
6. Click Refresh to retrieve the port information and Apply to allow the settings to t
Note: If a new GV-IP Device is connected with the GV-POE Switch, you m
11.16.5 Mapping IP Cameras
You can map IP cameras to the channels of GV-System by using the GV-IP Device Utility. Click the
NVR C ng window appears: amera Settings tab on the GV-IP Device Utility window and the followi
1
2
3
4
5
Figure 11-98
The buttons in the Dispatch Panel toolbar:
No. Name Description
1 Add Adds a new tab to create another set of IP camera settings.
2 Delete Deletes the selected tab.
3 Delete Selection Deletes the selected IP camera from the Dispatch Pattern section.
4 Clear All Clears all IP cameras in the selected tab.
5 Export Exports the IP camera mapping settings.
To map IP cameras to the channels of GV-System:
1. Drag one or multiple IP devices from the Camera List to the desired camera channels in the