User Manual

612
ch Pattern section.
to admin. If the
added IP camera does not use the default settings, you need to right-click the IP camera in the
n information.
ra mapping settings and then import the
settings back into the Main System. See Camera Mapping Using GV-IP Device Utility in Chapter
11 V2
The MCamCtrl Utility is an independent application that allows you to control GV-PTZ Camera, GV-PT
Camera, GV-IP Speed Dome, and any PTZ camera connected to GV-Video Server and GV-Compact
DVR using a GV-Joystick V2, a plug-and play device which is used to pan, tilt, zoom and focus a PTZ
camera.
Connect the GV-Joystick V2 directly to the GV-System and run the MCamCtrl Utility at the background,
you can remotely control the PTZ movement. For details on setting up the GV-Joystick V2, see
GV-Joystick V2 User’s Manual.
Note:
1. The GV-Joystick V2 supported in GV-System V8.5.9.0 or later. Up to 8 GV-Joystick V2 can
2. e GV-Joystick V mpower the operation of
ns. For d board V3 User’s Manual.
Dispat
2. By default, the login username and password for the IP camera both are set
Dispatch Pattern section and select Login User Information to modify its logo
3. You can use the Export button to export the IP came
2.
.17 MCamCtrl Utility for GV-Joystick
is
be connected.
Th 2 can work in conjunction with GV-Keyboard V3 to e
GV applicatio etails, see GV-Key
11.17.1 Installi
uter connected with a GV-Joystick V2:
1. Insert the Software DVD to your computer.
2. In the main menu, click Install GeoVision Supplemental Utilities.
3. Select GV-MCamCtrl Utility, and follow the on-screen instructions for installation.
ng MCamCtrl Utility
To install the MCamCtrl Utility on the comp