User Manual

Table Of Contents

Configuring Main System

1.6.3 Auto Start Recording

If the administrator does not press the mouse or press a key within a set period of time, the system will

automatically start recording.

1. In the System Idle Protection dialog box (Figure 1-40), select the Auto Monitoring option, and

select Monitoring All, Schedule Monitoring, I/O Monitoring or Camera Monitoring from the

drop-down list. When Monitoring All is selected, both I/O Monitoring and Camera Monitoring

will be enabled.

2. In the System Idle Over field, enter an idle time between 10 and 14400 seconds, after which the

system will start recording.

3. Enable Auto Network Service of Startup Setting for connection to WebCam Server, CenterV2,

VSM, Control Center Server, Backup Server (GV-Failover Server and GV-Redundant Server) and

Backup Center at system startup. To select one or more network connection, see Customizing

Startup Settings earlier in this chapter.

Note: The feature can monitor keystrokes or mouse clicks, even from IR Remote Control and

GV-Keyboard.