User Manual

Configuring Main System
1
1.11.4 PTZ Automation
Other than the PTZ control panel, you can display a Visual PTZ Control Panel on the image.
Figure 1-79
1. To control the PTZ, you must map one channel to the PTZ camera first. For details, see Mapping
PTZ Cameras earlier in this chapter.
2. To access the Visual PTZ Control Panel click on the desired Camera Name on the top left corner
of every channel, and select PTZ Automation. A separate PTZ control window appears.
3. To change the panel settings, click the green PTZ button on the top left corner of the PTZ control
window to have these options:
[PTZ Control Type]
 Fixed Direction Move: In this mode, the dome view can only be moved to the eight
directions (north, south, east, west, northeast, northwest, southeast and southwest). To move
the camera view, click and hold on to the dotted red line further from the panel. The round
panel appears when moving the mouse to the live view.
 Random Move: In this mode, you can move the camera view to any direction. Click any
place on the live view for the panel to appear, and right-click for the panel to hide. To move
the camera view, click and hold on to a desired direction. Click further for the camera view to
move faster.
 Center Move: In this mode, you can zoom in and out using the mouse scroll or by drawing a
block directly on the live view.
Note: The Center Move mode is only for GV-SD220.
95