User Manual

Video Analysis
3
3.4 Object Counting and Intrusion Alarm
under the surveillance area. When
defined, it could count any objects, such as people, vehicles, animals, etc.
n AVP dongle. With an AVP
dongle, you can set up the counter and intrusion alarm using lines to mark the boundary of detection
out an AVP dongle, boxes are used for outlining the detection zones.
1. The counter function is not suggested to be applied in Fisheye cameras.
intrusion alarm.
The Object Counting provides bi-directional counting of objects
The counter and intrusion alarm can be established with or without a
zones. With
Note:
2. You can select a maximum of 32 camera channels for object counting and
1. Click the Configure button (No.14, Figure 1-2), point to Video Analysis, and then select
Counter/Intrusion Alarm Setting. This dialog box appears.
Figure 3-18
2. Select the desired cameras for the counter application.
3. Select Update the Log and specify the time interval in minutes to store the counting results to the
System Log.
4. Select Show Object to put a rectangle around the object being tracked.
5. Click the Configure tab to open the Setup dialog box.
159