User Manual

160
3.4.1 Object Counting
To define the counter to count target objects, click the Counter tab.
With an AVP Dongle
Set up the counter by using lines to mark the bo ry of detection zones.
1. In the Choose p.
2. Select Enable
 Define De w lines on the
camera im
unda
Figure 3-19
Camera section, select a camera from the drop-down list for setu
Setting and set up the counter using the options below.
tection Zones: Select this option and use the mouse to dra
age to mark the boundaries of detection zones.
d to switch the direction and scheme of counting.
.
direction. When an object appears in
rection of the red arrow, it
The green arrow indicates an out direction. When an object appears
in the camera view and moves along the direction of the green arrow,
it will be counted as 1 out.
This button is use
Click this button to add green or red arrows or both
The red arrow indicates an in
the camera view and moves along the di
will be counted as 1 in.
Click this button to switch to another detection zone and then use
button to delete or the
button to edit.
Click this button to delete the detection zone.