User Manual

Remote Viewing
8
8.7 Multicast and Audio Broadcast
icast IP address
greatly increase the bandwidth efficiency when multiple hosts
As for audio broadcast, it allows a host to speak to other hosts using the same broadcast IP address
Note: To perform multicast within a LAN with different IP sequence numbers, e.g. 192.168.1.1 and
tion.
Multicast sends a single video and audio stream to multiple hosts using the same mult
and within the same LAN. Multicast can
access the same video and audio stream.
and within the same LAN.
192.168.2.1, you need a router supporting Multicast Pass Through func
8 st Settings
an configure two settings. One is to allow remote access to multicast delivered
Activating Multicast
ebCam Server and click the Multicast tab. The Server Setup
ault the IP address is 224.1.1.2 and port number is 8300 to send the video and audio
ssword for hosts to access multicast.
5. Click the Camera and Audio buttons to select which camera and audio is accessible through
multicast.
6. Select another Network Card, if available, to run multicast on a different network. Since the
multicast can take a lot of bandwidth when enabled, separating it from the main network is
advised whenever possible.
.7.1 Configuring Multicast and Broadca
On GV-System, you c
from the GV-System; the other is to receive audio broadcast from other host.
1. Click the Network button, select W
dialog box (Figure 8-13) appears.
2. Select Multicast to enable the multicast settings.
3. By def
stream. Modify default values if necessary.
4. Optionally specify a Pa
441