User Manual

444
8.7.3 Receiving Multicast and Audio Broadcast
ulticast
DVD, through the web interface of WebCam server, and through the
Multi View of WebCam server.
Using Multicast Program on Software DVD
1.
To remotely receive multicast and audio broadcast, there are three methods: use the m
program included on the Software
Install and run Multicast from the Software DVD. This dialog box appears.
Host List
Configure Button
ically
on, select General
rrectly configured.
et a password, you will
st, first ensure a speaker is properly installed on this computer. Click the
Configure button, select General Setup, select Receive Broadcast Audio, and ensure the
broadcast IP address and port number are correctly configured, and click OK.
5. To save the current settings of screen division and camera display for future use, click the
Configure button, select Video List Setup, and select Export. You can also select Import to
apply the pre-defined settings.
Figure 8-49
2. The host(s), using the same multicast IP address within the same LAN, is displayed automat
on the host list. If you cannot see any host displayed, click the Configure butt
Setup, and ensure the relevant IP address and port number are co
3. Drag the desired cameras to the screen for display. If the host has already s
be promoted to enter it at this step.
4. To receive audio broadca