User Manual

Center V2 1
1.17 Output Alerts
You can activate output devices locally (installed directly to the Center V2
server) and/or virtually (through the network) to warn the Center V2
operator when events occur. Up to nine (9) GV-I/O Boxes (including local
and virtual) can be connected to one Center V2 Server.
Note:
1. Only 8-port and 16-port GV-I/O Boxes can be connected to Center
V2 through Ethernet.
2. The GV-I/O Box must be installed in the same LAN with the Center
V2 server.
1.17.1 Configuring a Local GV-I/O Box
1. On the Center V2 window, click the Preference Setting button (No. 8,
Figure 1-2) and select Local I/O Device. This dialog box appears.
Figure 1-63
2. Select the Device, Port and Address using the drop-down lists and
then click the Add button.
3. Click OK to finish adding the GV-I/O Box.
4. To trigger outputs automatically by event, see Triggering Outputs by
Event later in this section.
5. To trigger outputs manually, see Triggering Output Manually later in
this section.
91